X hits on this document

63 views

0 shares

0 downloads

0 comments

21 / 22

Network Protocol Check the Network Protocol(s) used by the network for communication. The values are:

IPX NetBIOS

The transport protocol used in Novell NetWare networks.

Network Basic Input/Output System. Provides support necessary to send and receive data on IBM or Microsoft- based local area networks.

TCP/IP

Transmission Control Protocol/Internet Protocol. A network protocol used for LAN communication as well as Internet access.

Current Start Line

The Current Start line field shows the Run command used to start the connection to the Sybase server. This setting cannot be changed in EZConfig.

Check (Testing the Sybase Connection) After making changes with EZConfig, click the Check button to test the Sybase connection. Drive Map (Checking/Changing the Database Path)

Click the Drive Map button to show the settings for the physical and logical paths to the database. Click the Drive Map button to display the Input Serve Path for network drive dialog box. The Input Server Path for network drive dialog box requires two entries—the logical drive (the mapping from the workstation to the server) and the physical drive (the server drive letter and path).

Drive letter that is mapped from the workstation to the server.

Drive letter and path where CDS is installed on the server.

Client Data System® v4.3 - Installation Guide for Workstations Revised: 10-11-04 Page 17

Document info
Document views63
Page views63
Page last viewedTue Jan 17 09:45:09 UTC 2017
Pages22
Paragraphs409
Words5660

Comments