X hits on this document

PDF document

Sample Specifications for Rosco Subfloor System – - page 1 / 8

19 views

0 shares

0 downloads

0 comments

1 / 8

Sample Specifications for Rosco Subfloor System –

Section 09646 – Performance Floor Assemblies (Also Dance Floor Assemblies)

PART 1 – GENERAL

    • 1.1

      GENERAL

      • A.

        Work of this Section, as shown or specified, shall be in accordance with the requirements of the Contract Documents.

    • 1.2

      SUMMARY

      • A.

        This Section includes the following:

    • 1.

      Dance Flooring System

  • B.

    Related Sections include the following:

1.

Section 03000 – Concrete and Cement Finish:

Concrete sub-floor

2. 3.

construction and tolerances Section 06200 – Carpentry Division 09 Sections “Resilient Base and Accessories” for resilient

wall base and accessories installed with Dance Floor

    • 1.3

      SUBMITTALS

      • A.

        Product Data: Submit manufacturer’s detailed technical product information, application instructions and recommended procedures.

  • B.

    Samples: Provide 12-inch square samples for each type of finish flooring indicating color and texture of flooring

  • C.

    Maintenance Literature: Submit sufficient copies of floor manufacturer’s maintenance instructions, including the proper cleaning and finishing.

    • 1.4

      QUALITY ASSURANCE

      • A.

        Installer Qualifications: Installer shall have at least three years experience in installing similar dance floor systems and shall be approved by the manufacturer.

Specialty Dance / Performance Floor Assemblies

Section 09646

Document info
Document views19
Page views19
Page last viewedMon Dec 05 10:49:05 UTC 2016
Pages8
Paragraphs292
Words2161

Comments