X hits on this document

PDF document

Sample Specifications for Rosco Subfloor System – - page 2 / 8

20 views

0 shares

0 downloads

0 comments

2 / 8

    • 1.5

      DELIVERY, STORAGE, AND HANDLING

      • A.

        Store products in manufacturer’s unopened packaging until ready for installation.

  • B.

    Protect wood from exposure to moisture. Do not deliver wood components until after concrete, masonry, plaster, ceramic tile, and similar wet work is complete and dry.

  • C.

    Store wood components in a dry, warm, well-ventilated, weathertight location and in a horizontal position.

    • 1.6

      PROJECT CONDITIONS

      • A.

        The flooring system shall not be delivered and installed until all masonry, plastering, tile work, and all overhead mechanical and electrical trades are completed and building is enclosed and weather tight.

  • B.

    Permanent heat, light, and ventilation shall be installed and operating during and after installation, maintaining a temperature range of 55 – 75 degrees F (13 – 24 degrees C), and a relative humidity range of 35 percent to 60 percent

  • C.

    Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer’s absolute limits.

D. Once the installation is complete, do not operate mechanized lifts or other machinery in excess of the manufacturer’s absolute limits for loading capacity of the finished floor assembly.

PART 2 – PRODUCTS

    • 2.1

      MANUFACTURERS

      • A.

        Basis of Design Product: Rosco Laboratories, Inc. 52 Harbor View Avenue, Stamford, CT 06902 Email: floors@rosco.com; Web: www.rosco.com/us/products/floor.asp

2.2

RELOCATABLE INSTALLATION OF ROSCO SUBFLOOR SYSTEM SPRUNG FLOOR ASSEMBLY WITH VINYL FINISH FLOOR

A. Vapor Barrier: Polyethylene sheet as specified below.

Specialty Dance / Performance Floor Assemblies

Section 09646

Document info
Document views20
Page views20
Page last viewedTue Dec 06 20:17:30 UTC 2016
Pages8
Paragraphs292
Words2161

Comments